Automotive Education Simulator

Technical Parameter Range

Operating Power Supply: DC 12V (with 60AH battery), some models require AC 220V auxiliary power supply

Fuel Requirements: 92# and above gasoline, fuel tank capacity is usually 10L

Dimensions: Length × Width × Height, mostly between 1500~1650mm × 1000mm × 1700~1850mm

Operating Temperature: -40℃～+50℃ (some models are rated -50℃～+50℃)

Weight: Approximately 320~420kg (excluding oil)

Frame Structure: Welded steel base, powder coated, with self-locking casters (caster specifications are usually 120×80mm)

Panel Material: 4mm corrosion-resistant aluminum composite panel or plexiglass protective coating for printed circuit diagrams, including test terminal blocks

Core Functional Configuration

Powertrain: A fully functional electronically controlled gasoline engine (e.g., 1.6L/2.4L (e.g.) + Automatic Transmission (4-speed/5-speed hydraulic automatic), supporting start-up, acceleration, shifting, and stall testing.

Monitoring and Display: Instrument cluster, fuel/vacuum/main oil pressure gauges, real-time display of RPM, coolant temperature, gear position, oil pressure, etc.

Diagnostic Interface: OBD-II diagnostic connector, supporting decoder reading of fault codes, data streams, and actuator testing.

Fault Simulation: Independent intelligent assessment system (usually equipped with a 3.8-inch screen), supporting 16~32 channels of open circuit/short circuit/poor contact fault settings, dual-interface operation for teachers and students.

Safety Protection: Main power switch, rotating part protective cover, water tank cover, emergency braking loading device.