Introduction of Jetta Automobile Air Conditioning System Training Platform
The product adopts the manual refrigeration system of Volkswagen Jetta. It adopts high-quality steel plate frame, which is machined and formed, and the outer surface is sprayed with colored epoxy polyplastic. There are two doors at the back of the test bench, which is convenient for maintenance. On the right is the fault setting device. The bottom adopts the universal wheel with brake, which is suitable for moving and fixing, and it is convenient to adjust the placement of the equipment. The whole machine is durable and beautiful. Supporting instruction manual and training guide.
(1) Structural composition
Three-phase speed regulating motor, air conditioning evaporation box, compression pump, electrical components of air conditioning control system, pressure gauge, air supply pipeline, air conditioning radiator, drying bottle, various sensors, high and low pressure pressure gauge, fault setting and troubleshooting box, Control panel, large-scale color inkjet circuit schematic diagram, movable bench, power supply, and training instructions.
(2) Features
1. Digital display thermometer shows the temperature inside and outside the car;
2. Air conditioning compressor clutch, condenser fan, blower, etc. are controlled by 220V DC power conversion, which is convenient and safe;
3. The air volume can be adjusted manually;
4. The pointer meter displays high and low pressure in real time;
5. Digital thermometer to visually display the temperature of the evaporator outlet;
6. Vacuuming, refrigerant charging, refrigerant leak detection, etc. can be performed through special instruments;
7. The fault simulation system can simulate actual operating conditions and set up a variety of common faults. For details, please refer to the description of the fault simulation setting device.
8. Digital voltmeter displays the signal of each sensor;
9. A heating device can be added;
(3) Technical parameters
1. Appearance size 1450mm × 1000mm × 1850mm (length × width × height)
2. High-temperature baking paint treatment for craft car paint; protective devices are installed outside the rotating parts; and AC power leakage protection devices are installed.
3. Speed regulating motor: 380V/1.5KW
4. Battery: 60AH/12V
5. AC power supply: 380V; 220V
