Introduction of Corolla Air Conditioning System Training Platform
The product adopts Corolla automatic air conditioning and refrigeration system. It adopts high-quality steel plate frame, which is machined and formed, and the outer surface is sprayed with colored epoxy polyplastic. There are two doors at the back of the test bench, which is convenient for maintenance. On the right is the fault setting device. The bottom adopts the universal wheel with brake, which is suitable for moving and fixing, and it is convenient to adjust the placement of the equipment. The whole machine is durable and beautiful. Supporting instruction manual and training guide.
(2) Structural composition
Three-phase speed regulating motor, air-conditioning evaporation box, compression pump, electrical components of air-conditioning control system, pressure gauge, air supply pipeline, air-conditioning radiator, drying bottle, air-conditioning control computer, air-conditioning system sensors and actuators, high and low pressure pressure gauges , fault setting and troubleshooting box, control panel, large-scale color inkjet circuit schematic diagram, movable bench, power supply, diagnostic base, engine control computer and crankshaft sensor, training instructions.
(3) Features
1. Digital display thermometer shows the temperature inside and outside the car;
2. Air conditioning compressor clutch, condenser fan, blower, etc. are controlled by 220V DC power conversion, which is convenient and safe;
3. Automatic adjustment of air volume and temperature;
4. The pointer meter displays high and low pressure values in real time;
5. Digital thermometer to visually display the temperature of the evaporator outlet;
6. Vacuuming, refrigerant charging, refrigerant leak detection, etc. can be performed through special instruments;
7. The fault simulation system can simulate actual operating conditions and set up a variety of common faults.
8. Digital voltmeter displays the signal of each sensor;
9. Toyota automatic air conditioning system code reading operation, etc.;
10. A heating device can be added;
(4) Technical parameters
1. physical dimension: 1450mm × 1000mm × 1850mm(L×W×H)
2. craft: High-temperature baking paint treatment for automobile paint; protective devices are installed on the rotating parts; and AC power leakage protection devices are installed.
3. Speed regulating motor: 380V/3.5KW
4. Battery: 60AH/12V
5. AC power supply: 380V; 220V
