Product introduction
The device is based on the physical object of the new Volkswagen Shichao car charging system, which fully demonstrates the composition and working process of the car charging system.
It is suitable for the teaching needs of the school for the theory and maintenance training of the car charging system.
This equipment meets the teaching needs of "five connections and ten connections" in automotive vocational education.
Features
1. After the system components are plugged into the line, the real and operational car charging system fully demonstrates the composition and structure of the car charging system.
2. Manipulating the switch can truly demonstrate the working process of the car charging system.
3. The panel of the teaching board is made of high-grade aluminum-plastic board with impact resistance, pollution resistance, fire resistance and moisture resistance. The surface is treated with a special process of spraying primer; students can intuitively compare the circuit diagram and the real object to understand and analyze the working principle of the car charging system.
4. There are detection terminals installed on the panel of the teaching board, which can directly detect the electrical signals of each circuit element of the car charging system, such as resistance, voltage, current, frequency signals, etc. on the panel.
5. The panel part of the teaching board adopts a 1.5mm cold plate stamping and forming structure, which has a beautiful appearance; the bottom frame is welded with steel structure, the surface is treated with spraying technology, and has a self-locking caster device. The base of the teaching board is equipped with a desktop of about 40cm . , easy to place materials, light testing instruments, etc.
6. The teaching board uses ordinary 220V AC power supply, which is converted into 12V DC power supply through the internal circuit transformer and rectification , without the need for batteries, reducing the trouble of charging, and the 12V DC power supply has the function of preventing short circuit.
Technical parameters
Dimensions: 1240 × 600 × 1700mm ( length × width × height )
External power supply: AC 220V ± 10% 50Hz
Working voltage: DC 12V
Working temperature: -40 ℃～+50 ℃
Color: 7032
Steel pipe: 40*40*3mm
Cabinet: 1.5mm cold plate stamping and forming, with maintenance door on the back;
Mobile casters: 100*60mm
The basic configuration ( each )
serial number | name | Specifications | unit | quantity |
1 | Inspection Control Panel | Equipped with various detection terminals, color circuit diagram and working principle diagram ; panel: 1200*900*4mm | set | 1 |
2 | Ignition Switch | indivual | 1 | |
3 | Generator assembly | set | 1 | |
4 | charging indicator | Only | 1 | |
5 | Various analog operation switches | set | 1 | |
6 | Single-phase AC motor | set | 1 | |
7 | motor control device | set | 1 | |
8 | Mobile stand ( with self-locking caster device ) | 1240 × 700 × 1700mm( L×W×H ) | tower | 1 |
9 | Fault simulation and elimination device | set | 1 | |
10 | Power Transformers and Accessories | set | 1 | |
11 | Leakage protection switch | set | 1 | |
12 | Experimental patch cord | set | 1 | |
13 | Batteries and accessories | set | 1 | |
14 | ammeter | Only | 1 |
