ZCC-DLB Automotive Basic Electrical System Connection Bench

Product introduction

Made with real components of the new Volkswagen Santa 2000 vehicle electrical system, including lighting module, instrument module, engine electronic control module, charging module, starting module, audio module, wiper module, window central control lock. The electric rear-view mirror module cultivates students' ability to connect wiring, analyze circuits and troubleshoot circuit faults.

Features

1. After the system components are plugged into the wires, the real and operational automotive electrical systems fully demonstrate the composition and working principles of the automotive electrical systems.

2. Manipulate the switches to truly demonstrate the working process of the various systems of automotive electrical appliances.

3. The equipment panel is made of high-grade aluminum-plastic board that is resistant to impact, pollution, fire and moisture, and the surface is treated with a special process of spraying primer; the panel is printed with a color circuit diagram that will never fade; Analyze the working principle of each system of vehicle electrical appliances.

4. There are wiring detection terminals and circuit schematic diagrams on the module. Students can conduct practical training on the line connection of each module according to the circuit schematic diagram, so as to exercise students' ability to actually operate and analyze circuits;
5. Floor-to-ceiling mobile structure: minimized The area of the training bench, the waste of space and the shortage of the number of workstations in the training room;

6. Module structure: integral ;
7. The difficulty level of each module line is different, and teachers can conduct different levels of training assessment for students according to the difficulty level of the module line;

8. The whole bench is equipped with rollers, which is convenient for the movement of the equipment.

Technical Specifications

Assessment form: wiring type

Power supply voltage: 220V AC, 50HZ

Working voltage: 12V

Troubleshooting for all vehicle electrical appliances

Dimensions (approx.): 2080 × 700 × 1900mm ( length × width × height )

Power supply: three-phase four-wire ( or three-phase five-wire ) 380V ± 10% 50Hz

Working voltage: DC 12V

Working temperature: -40 ℃～+50 ℃

Three-phase asynchronous motor

Model: YT 100L1-4

Voltage: AC 220V/380V

Power: 2.2KW

Speed: 1420r/min

Color: 7032

Steel pipe: 40*40*3mm

Cabinet: 1.5mm cold plate stamping and forming, with maintenance door on the back;

Mobile casters: 100*60mm

Basic configuration (each )