High Vacuum PVD Metallizing System for Plastic/Evaporation Vacuum Coating Machine

Facing the future, we will always carry forward the spirit of striving for first-class, stand out in the market competition, and create more high-quality electric power steering (eps) training bench, automotive gearbox equipment, vocational engine. We continue to strengthen the internal staff management and tap their own potential. We have always provided customers with quality products and services with a grateful heart and a strong sense of responsibility.

Structure and composition:

The top part of the start system teaching board is the disassembled part of the starter, the lower part is the physical assembly; the battery, ignition switch, main power switch, color principle and structure diagram, fault setting system, instruction manual and task-driven training guide books and so on.

Features

1. The switch and button can be used to demonstrate the working process of the car starting system.

2. The digital display shows the voltage value.

3. Various signal parameters such as voltage, current, and resistance can be tested through the corresponding circuit detection terminals on the panel;

4. The LED shows the state of the starter.

5. The fault simulation system can simulate the actual operating conditions and set up a variety of common vehicle faults. For details, please refer to the description of the fault simulation setting device.

6. Car paint high temperature baking treatment; additional protective devices installed on the rotating parts; install AC power leakage protection device.

7. Mobile gantry with locking casters for easy movement.

Parameter:

Dimensions: 1200×800×1800mm (length × width × height).

Power supply: 220V AC voltage.

Working voltage: 12V DC voltage.

Working temperature: -50 ℃ ~ 50℃.

Battery: 60AH/12V.

FAQ:

1.Are you a trading company or manufacturer?

We are manufacturer, we supply these equipment directly. Welcome to visit!

2.What is your guarantee or the warranty if we buy your machines ?

We offer you high quality machines with 1 years guarantee and supply life-long technical support.

3.How can I install my equipment when they arrived?

Our equipment does not need to be installed, it can be used directly after arrival, you only need to check for damage.

4.How about the spare part ?

After we confirmed the machines order, we will offer you a spare list for your reference.

To constantly improve the management system by virtue of the rule of 'sincerely, good faith and quality are the base of enterprise development', we widely absorb the essence of related products internationally, and constantly develop new products to meet the demands of customers for High Vacuum PVD Metallizing System for Plastic/Evaporation Vacuum Coating Machine. We have long been committed to continuous improvement in all aspects of the company, so as to provide customers with the most competitive products and services. Since the establishment of our company, we have always explored the road of industrial development with revolutionary and leaping innovative ideas.