Sep 29, 2022 Leave a message

ZCC-WP10.270N Weichai WD615.8 Diesel Engine Training Bench

Desktop training platform (refer to Figure 1)

 

Vertical training platform (refer to Figure 2 )

1. Product Introduction
This training system is based on the new Weichai WP10.270N original diesel engine assembly and operating accessories as the main components. The engine can be started and run, starting, accelerating, decelerating, fault detection and diagnosis, fault simulation and elimination and other working conditions The actual operation of the diesel engine truly shows the structure, principle and working process of the diesel engine. It is suitable for the practical training and teaching needs of various types of colleges and training institutions for automobile engine theory and maintenance training.


This training system has complete training functions, convenient operation, safety and reliability, and beautiful appearance. two. 


2. Main use

1 . It is suitable for the practical training and teaching needs of various types of colleges and training institutions for automobile engine theory and maintenance training. 

2 . It is suitable for the teaching needs of various types of colleges and training institutions for each unit of the automotive engine module. 

3 . It is suitable for the teaching needs of the integrated teaching mode of automobile theory and practice. 

4 . The teaching needs of the teaching mode suitable for on-site teaching. 

5 . It is suitable for the teaching needs of the action-oriented teaching mode. 

6 . It is suitable for the teaching needs of the technological teaching mode. 

7 . It is suitable for the teaching needs of the three-in-one (classroom, field, and experiment organic integration) teaching mode. 

8 . It is suitable for the teaching needs of the modular teaching mode. 

9 . Applicable to the needs of automobile vocational skills appraisal and assessment. 

10 . It is suitable for the teaching needs of the structure and principle cognition, function dynamic demonstration, fault simulation and assessment, fault detection and maintenance, fault diagnosis and elimination of each module. 


3. Structure and composition

Original diesel engine assembly, original vehicle engine control computer, combination instrument, all related original vehicle accessories for engine starting and running, fault simulation assessment and elimination system, original vehicle circuit schematic board and testing terminals, 90AH large-capacity battery, large-capacity Stainless steel fuel tank, engine acceleration mechanism, control panel cabinet, movable bench, bench power main switch, cooling system, bench operation manual, experimental guide and other accessories.
Install a digital display meter to display parameters, casters with locking universal directions, round steel pipe guards on both sides, and protective devices for high temperature and rotation parts of the bench.
▲ For the specific configuration and accessories of the equipment, please refer to the description of the configuration list. 


4. Features

1 . The engine starts and runs normally, and the simulated operating conditions of the engine are normal (including: idling, acceleration, deceleration, etc.). 


2 . The fault simulation system can simulate the actual operating conditions, and set up a variety of common engine faults (normal: 1-36 ), and the content and type of fault points can be adjusted according to the user. 


3 . The voltmeter displays changes in parameter data in real time. 


4 . The panel of the training platform is painted with the same color inkjet engine system circuit diagram of the original car, and the 1.5mm cold plate directly inkjet color schematic diagram (the UV flat panel inkjet principle panel is guaranteed for many years without discoloration). 


5. Students can intuitively compare the principle circuit diagram and the actual system to understand and Analyze how the engine system works. 


6 . There are multi-function detection terminals installed on the panel of the training platform, which can directly detect the electrical signals of each terminal pin of the engine circuit system on the panel, such as resistance, voltage, current, frequency, waveform signal and other parameters. 


7 . The training platform is equipped with safety protection devices such as the main power switch of the battery, the protective cover of the water tank, the protective cover of the flywheel and other rotating parts.

8 . The base part of the training bench is welded with steel structure, the panel cabinet is stamped and formed, the panel cabinet and the base can be separated, the surface of the bench adopts the baking paint process, and has a universal self-locking caster device. five. Use environment

Outdoor temperature

-50℃~50 ℃

AC power

Matching battery charger

Working power

24V/150AH battery

Sewage matching

The training site is also equipped with an engine exhaust emission device

Air pressure package

none

cooling system

1. The liquid level of the cooling system is normal
  2 . It is recommended that users use engine-specific coolant
  3. Use engine-specific antifreeze in winter

Oil matching

1. Lubricating oil for diesel engine
  2 . Light diesel oil

Electrolyte

Supporting battery use
  Regularly check the electrolyte level of the battery


6. Teaching project

serial number

Teaching project

project description

one

Structure and principle understanding

1. Structure and principle cognition
  2 . Understand the structure and principle
  3 . Use with teaching materials

two

Structure and principle lectures

1. Lecture on structure and principle
  2. Use with teaching materials

three

Synchronization of theory and practice

1. Structure and principle cognition
  2 . Understand the structure and principle
  3 . Structure and principle lectures
  4 . Synchronize theory and practice with practical operation
  5 . Engine control circuit detection
  6 . Use with teaching materials
  7 . diesel engine fuel injection

Four

Demonstration and observation training

1. Demonstration and observation training
  2 . Understand the structure and principle
  3 . Structure and principle lectures
  4 . Use with teaching materials

five

Disassembly and maintenance training

1. Engine maintenance
  1.1 Replacement of fuel injector
  1.2 Replacement of air filter
  1.3 Replacement of fuel filter
  1.4 Replacement of oil filter
  1.5 Replacement of oil
  1.6 Replacement and adjustment of generator belt 1.6 Replacement and adjustment
  of timing mechanism Adjust
  1.7 injector test
  2 . Use with teaching materials

six

Inspection and maintenance training

1. Detection and maintenance of engine control circuit
  2. Detection of cylinder pressure
  3. Detection of fuel injection pressure
  4. Detection of diesel engine smoke
  5. Detection of fuel injection timing
  6. Detection and maintenance of diesel engine fuel injection system
  7. Inspection and maintenance of intake control system
  8. Inspection and maintenance of emission control system

seven

Fault simulation and assessment

1. Fault simulation and assessment of engine circuit control system
  2. Number of fault simulation and assessment: 1-36 nodes (conventional)
  3. Type of fault simulation and assessment: ① Line open circuit (conventional); ② Signal short circuit; ③ Signal deviation;
  4 .Fault simulation and assessment system can be adjusted according to the actual use of users.
  5. Auto vocational skills assessment to strengthen practical training
  6. Automobile vocational skills assessment - special assessment of engine fault diagnosis and elimination

Eight

Troubleshooting and troubleshooting

1. Fault diagnosis and removal of engine circuit control system
  2. Fault diagnosis and removal of charging system
  3. Fault diagnosis and removal of starting system
  4. Fault diagnosis and removal of diesel fuel injection system
  5. Fault diagnosis and removal of intake control system
  6. Emission control System fault diagnosis and elimination
  7. Comprehensive fault diagnosis and elimination of engine oil circuit system

Nine

Teaching project support

1. Diesel Engine Maintenance Manual
  2. "Traditional Automobile Engine Training Course" Editor-in-Chief Ou Huachun Publisher: Chongqing University


7. Configuration list (per unit)
Basic configuration ( per unit )

serial number


Specifications

unit

quantity

illustrate

1

Original car engine assembly

Engine assembly Weichai WP10.270N complete
  machine technical specifications see attachment with original factory certificate / warranty card
 

set

1

Original brand new

2

Inspection control panel (UV printing plate /1.5mm cold plate )

Equipped with various detection terminals and color schematic diagrams

set

1

brand new

3

Original car combination instrument

Original car

set

1

brand new

4

Ignition switch assembly / with preheat gear

Original car

indivual

1

brand new

5

battery

Original car

tower

1

brand new

6

main power switch

50A/ Model JK861

indivual

1

brand new

7

Fuel tank

30L/1.0mm stainless steel housing

indivual

1

brand new

8

fuel quantity sensor

new

set

1

brand new

9

Throttle Control

New / Mechanical Throttle Mechanism

set

1

brand new

10

Water tank ( including original car protective cover )

Original car

set

1

brand new

11

cooling fan

Raw material

indivual

2

brand new

12

Intake and exhaust pipes ( with protective cover )

Original car

set

1

brand new

13

Preheating device

Original car

set

1

brand new

14

Fault setting and assessment system

DBCQ-ZN intelligent fault setting and assessment system

set

1

brand new

15

Mobile stand ( with self-locking casters )

Desktop: 1900×1400×1200mm
  ( L × W × H )

tower

1

brand new

16

expansion device

Optional according to extended functions

set


brand new


8. Supporting accessories

Experimental guidance

Use of supporting equipment, including teaching materials for each unit module experiment guidance, introductory guidance, tour guidance, summary guidance and other links. It is suitable for the teaching needs of various teaching modes and systems.

Faculty Work Page

Use of supporting equipment

Student Work Page

Use of supporting equipment

Course synchronization materials

The use of supporting equipment, including original vehicle maintenance materials, teaching course synchronization, teaching materials learning platform and other materials.

Equipment certificate

Use of supporting equipment

Equipment Warranty Card

Use of supporting equipment


9. manufacturing process

Device detection panel

1. Steel structure welding
  2 . Cold plate: 1.5mm
  3. One-time stamping
  4 . The surface adopts matte gray spraying process, the thickness is 0.3mm.
  5. UV flat plate high-definition color spraying

Equipment panel cabinet

1. Steel structure welding
  2 . Cold plate: 1.5mm
  3. One-time stamping
  4 . The surface adopts the matte gray spray process, the thickness is 0.3mm.

Equipment base stand

1. Steel structure welding
  2 . Square tube: 40*40*2.0mm
  3. Bottom stamping forming
  4 . The surface adopts the matte gray spray process, the thickness is 0.3mm.

Universal casters

1. The first two universal casters with locking function
  2 . The last two universal casters
  3 . The casters and the stand are fixed with M6*4 screws, which is convenient for equipment repair and maintenance.
  4 . Caster: 100mm×50mm ( diameter × width )
  5. Caster support: 1.5T

Nine. shape and color

Device shape

Desktop: 1900×1400×1200mm( L × W × H )

device color

Matt grey (user can choose various colors)


10. Extended function
assessment device and software
information manager
When using the teacher's computer to operate the equipment failure, this information manager should be used. The information manager is connected through the USB port of the computer, and uses USB2.0 to transmit data. The communication bus of the information manager can choose CAN bus, 485 bus or wireless.
Controller
The controller consists of two parts: the operation unit and the fault unit.


1. Operation unit
Operation unit circuit board (integrated with display screen), keyboard.
The operation unit adopts multiple protection design; dual power supply DC 12V input; 128X64LCD display; 8 channels of switch alarm input, up to 48 channels of relay control; the operation unit can be tested offline without networking; it can be automatically scored; the display prompts when there is an alarm.
It can be upgraded to a wireless network version of the intelligent assessment system. It mainly has the following operation functions: 

( 1 ) Student entrance: used when students remove the fault, and can check the remaining time of the assessment. 

(2) Teacher entrance: set faults, .remove all faults, set assessment time, modify login password, and set device number. The teacher entrance requires a login password. 

( 3) Score query: query the current score of the student.
( 4 ) Student ID query: query the student ID set by the teacher through the computer.
( 5 ) Device number query: query the device address of the machine, each operating unit has a unique device address.
( 6 ) Start of assessment time: After the teacher has set the assessment time, the assessment starts to count down.


2. Fault unit The fault unit has 24 fault points (the number can be increased or decreased), each operation unit can be connected to two or one fault board, the contact parameters of the relay: 10A/24VDC , 7A/240VAC . Connect to the operating unit via a flat cable.


Application software
The software is installed on the teacher's computer, and the faults and student information are stored in the database.
The software is simple to operate and easy to use. It mainly has the following functions:
(1) Setting student information
(2) Editing, querying and publishing all faults of all equipment
(3) Clearing all faults of equipment
(4) Setting up elementary, intermediate and advanced question banks
( 5) Set the assessment time
(6) Extract and inquire about all fault removals of all equipment.
(7 ) Print the assessment results
(8) Whether the test equipment is online or not
(9) The number of devices that can be connected to the main control unit to modify the login password : 

( 1 ) The information manager is configured as a 485 bus and can connect up to 64 devices . Configured as a CAN bus, it can connect a maximum of 110 devices . When configured as a wireless mode, it can connect a maximum of 255 devices. equipment


Send Inquiry

whatsapp

Phone

E-mail

Inquiry