ZCC-STNDQ Santana 2000 Whole Vehicle Electrical Training Platform

The equipment is based on the new Santana 2000 vehicle electrical appliances, and fully displays the car engine anti-theft system, instrument system, lighting system, wiper system, horn system, ignition system, power window system, power door lock, audio system, starting system The structure and working process of each system of automotive electrical appliances such as charging system.

It is suitable for the school's teaching needs for vehicle electrical theory and maintenance training.

Features

1. A real and operational vehicle electrical system, fully demonstrating the composition of the vehicle electrical system.

Turn on the power, operate various electrical switches and buttons on the teaching board, and demonstrate the car engine electronic control system, instrument system, lighting system, wiper system, horn system, ignition system, power window system, power door lock, The working process of various automotive electrical systems such as audio system, starting system and charging system.

2. The equipment panel is made of high-grade aluminum-plastic panels that are resistant to impact, pollution, fire and moisture. The surface is treated with a special process of spraying primer; the panel is printed with a color circuit diagram that will never fade; Analyze the working principle of each system of vehicle electrical appliances.

3. The detection terminal is installed on the panel of the teaching board, which can directly detect the electrical signals of the circuit components of the vehicle electrical appliances, such as resistance, voltage, current, frequency signals, etc. on the panel.

4. There is a diagnostic socket installed on the equipment panel, which can be connected to a dedicated or general-purpose car decoder to query ECU codes, read fault codes, clear fault codes, and read data streams for engine control units, combination meters, comfort system units, etc. , executive component test, parameter setting, waveform analysis, key matching and other self-diagnostic functions.

5. The panel part of the equipment adopts the 1.5mm cold plate stamping and forming structure, and the appearance is beautiful; the bottom frame part is welded by steel structure, the surface is treated by spraying process, and has self-locking caster device.

Technical Specifications

Dimensions (approx.): 2080 × 700 × 1900mm ( length × width × height )

Power supply: three-phase four-wire ( or three-phase five-wire ) 380V ± 10% 50Hz

Working voltage: DC 12V

Working temperature: -40 ℃～+50 ℃

Three-phase asynchronous motor

Model   : YT 100L1-4

Voltage: AC 220V/380V

Power: 2.2KW

Speed: 1420r/min

Color: 7032

Steel pipe: 40*40*3mm

Cabinet: 1.5mm cold plate stamping and forming, with maintenance door on the back;

Mobile casters: 100*60mm

The basic configuration (each)