ZCC-DQyg Accord Automobile Electric Training Desk - News

Functional characteristics

1. The real -operated vehicle electrical system, fully display the composition of the vehicle's electrical appliance system. Connect the power supply, manipulate various electrical switches, buttons, real demonstration car engine electrical control systems, instrument systems, lighting systems, wiper systems, speaker systems, ignition systems, electric door locks, electric door locks, electric door locks, electric window systems, electric window systems The work process of automotive electrical appliances such as audio systems, starting systems and charging systems.

2. The equipment panel adopts high -grade aluminum -plastic panels with strikes, pollution resistance, fire prevention, and moisture -proof; panel printing has a color circuit diagram that will never fade; students can intuitively control the circuit diagram and physical objects, understand and analyze the work of the vehicle's electrical system system principle.

3. The detection terminal is installed on the teaching panel. You can directly detect the electrical signals of the circuit components of the vehicle electrical electrical system on the panel, such as resistance, voltage, current, frequency signals, etc.

4. The diagnostic seat is installed on the equipment panel, which can be connected to a dedicated or universal car decoder to perform ECU coding inquiries, read fault codes, remove fault code, read data flow on the engine control unit, combined instrument, comfort system unit, etc. , Execute component testing, parameter settings, waveform analysis, key matching and other self -diagnostic functions.

5. The panel part of the equipment panel adopts a 1.5mm cold plate stamping formation structure and a beautiful appearance.

Technical specifications

1. Dimensions: No more than 2080 × 700 × 1900mm (long × width × height);

2. Power power supply: three -phase and four lines (or three -phase and five lines) 380V ± 10% 50Hz;

3. Work voltage: DC 12V;

4. Work temperature: -40 ℃ ～+50 ℃;

5. Three-phase asynchronous motor: YT 100L1-4;

6. Voltage: AC 220V/380V;

7. Power: 2.2kW;

8. Speed speed: 1420r/min;

9. Steel pipe: 40*40*3mm;

10. Cabinet: 1.5mm cold plate stamping, setting maintenance door on the back;

11. Move foot wheel: 100*60mm;

Basic configuration (each)

1. Demonstration panel panel: equipped with various detection terminals and color circuit diagrams; 1 set;

2. The engine control computer (ECU): original car; 1 set;

3. Diagnostic seat: original car; 1 set;

4. ignition switch: original car; 1 set;

5. Combination instrument: Original car; 1 set;

6. Combination switch: Original car; 1 set;

7. Left and right front headlight assembly: original car; 1 set;

8. Left and right front fog lights: original car; 1 set;

9. Turn left and right: Original car; 1 set;

10. Turn left and right to the side light: original car; 1 set;

11. Left and right combination taillights: original car; 1 set;

12, license plate light: original car; 1 set;

13. High -level brake light: original car; 1 set;

14, light switch: original car; 1 set;

15, brake light switch: original car; 1 set;

16. Direct light switch: original car; 1 set;

17. Danger lamp switch: original car; 1 set;

18. Wire beam: 1 set;

19. Wiper assembly: original car; 1 set;

20. Wiper controller: original car; 1 set;

21, water spray motor: original car; 1 set;

22, a spray kettle: the original car; 1 set;

23, speaker: original car; 2;

24. Horizontal relay: Original car; 1;

25. X contact relay: original car; 1;

26. Fog light relay: original car; 1;

27. No division of electrical ignition system: including ignition weapon assembly, spark plug, crankshaft position sensor; 1 set;

28. Simulation of fuel injection mouth indicator: 1 set;

29, fuel pump relay: original car; 1;

30, fuel pump indicator light: original car; 1;

31. Captive position sensor and signal wheel: original car; 1 set;

32. The main switch of the electric window: the original car; 1 set;

33. Left and right front door computer: original car; 1; 1;

34, comfortable computer: original car; 1;

35. Right front door lock motor: original car; 1 set;

36. Left and right Electric Window Mot: Original car; 1 set;

37. Left and right rear electric window switch: original car; 1 set;

38. Left and right rear door lock motor: original car; 1 set;

39. Car audio assembly: original car; 1 set;

40, speaker: 6 ", 200W; 1 pair;

41. Motor assembly: original car; 1;

42. Generator assembly: Original car; 1;

43. Three-phase asynchronous motor: YT 100L1-4; 1;

44. Battery: 12V 45AH; 1;

45, fuse box: 2;

46. Total power switch: 50A; 1;

47. Mobile tables (with self -locking foot wheel devices): 2080 × 700 × 1800mm (long × width × height); 1;

48. Fault simulation and exclusion device: 1 set;

49. Teacher Manual: 1 set;

50. Qualification certificate and warranty card: 1 set;

Teaching system

Supporting automotive multimedia teaching system (16 -in -one) (16 -in -one) (one 16 -in -one) (one 16 -in -one) (one 16 -in -one) required teaching system, no provider cancels the bidding qualification, and provides live demonstrations on the system, otherwise the bid will be invalid.), Adapt to all textbooks, rich content and can be retrieved at will at will Essence Reasonable use of the multimedia teaching system can largely reduce the workload of teachers' lectures.

Provide on -site demonstration content:

1. Car engine construction and maintenance;

2. The structure and maintenance of the car chassis;

3. The construction and maintenance of automobile electrical appliances;

4. The principle and maintenance of the electronic control engine;

5. The principles and maintenance of automobile air conditioners;

6. The principle of car safety and comfort system structure and maintenance;

7. Automobile maintenance and maintenance;

8. Automotive body structure and repair;

9. Automotive detection and fault diagnosis technology;

9. Automotive mechanical basis;

10. Auto beauty and decoration;