Sep 29, 2022 Leave a message

Volkswagen 01M Automatic Transmission Training Platform

(1) Product introduction

This training bench is based on the 01M original electronically controlled automatic transmission, and the speed-regulated three-phase motor is the power source. The structure, principle and working process of the electronically controlled automatic transmission are truly displayed. It is suitable for the practical training and teaching needs of various types of colleges and training institutions for the theory and maintenance training of automotive electronically controlled automatic transmissions.

This training platform has complete training functions, convenient operation, safety and reliability, and beautiful appearance.

2011617213359392.jpg

(2) Structural composition

01M automatic transmission assembly, automatic transmission control unit, gear lever assembly, transmission oil cooling device, combination instrument, three-phase speed regulating motor, throttle body assembly, engine crankshaft sensor and signal plate, diagnostic seat, pressure gauge, Fault setting system, original car circuit schematic board and detection terminals, mobile bench, etc. Equipped with a training instruction book and a bench operation manual for the task-driven teaching mode.

Each sensor and actuator is installed with a digital display meter, a main oil channel pressure gauge is installed on the bench, casters with locking universal direction, stainless steel hand guards, and protective devices are installed on the high temperature and rotation parts of the bench.


(3) Features

1. The automatic transmission is in normal operation, and the diode shows the solenoid valve working condition.

2. The fault simulation system can simulate the actual operating conditions, and set up a variety of common faults in the automatic transmission of real vehicles. For details, please refer to the description of the fault simulation setting device.

3. The pointer pressure gauge indicates the pressure value of the main oil passage.

4. The color inkjet circuit diagram is painted on the panel of the training platform, and the inkjet diagram is protected by plexiglass. Students can intuitively compare the circuit diagram and the actual engine to understand and analyze the working principle of the control system.

5. There are detection terminals installed on the panel of the training platform, which can directly detect various sensors and actuators on the panel, such as resistance, voltage, current, frequency, waveform signal, etc.

6. Equipped with the original car diagnostic seat, the computer diagnostic instrument can be used to read the fault code and data flow of the automatic transmission electronic control system.

7. The training platform is equipped with safety protection devices such as the main switch of the power supply and the protective cover of other rotating parts.

8. The transmission can carry out various practical training programs. The transmission can be practically tested for shifting/automatic upshifting.

9. The base part of the training bench is welded with steel structure, the panel cabinet is stamped and formed, the panel cabinet and the base can be separated, the surface of the bench adopts the baking paint process, and has a universal self-locking caster device.


(4) Technical parameters

1. Dimensions: 1450mm X 1000mm X 1850mm (length X width X height)

2. Power supply: 380V AC voltage

3. Input power: 220V AC voltage

4. Working power supply: 12V DC voltage

5. Working temperature: -50℃~50℃,

6. Motor: 5.5KW/380

Send Inquiry

whatsapp

Phone

E-mail

Inquiry