Catalogues

Guangdong Zhongcai Education Equipment Co.,Ltd. is one of the most reliable manufacturers and suppliers of catalogues in China. Welcome to buy high quality engineering education equipment from our factory. Also, OEM&ODM service is available.

AUTOMOTIVE EXHAUST GAS ANALYZER

Model: ZC-QCF01A

FEATURES:

The automotive emission gas analyzer uses the non-dispersive infrared spectroscopy (NDIR)

principle to measure the composition of carbon monoxide (CO), carbon dioxide (HC), and carbon

dioxide (CO₂) in motor vehicle exhaust. It uses an electrochemical cell principle to measure the

composition of oxygen (NO₂) and oxygen (O₂) in the exhaust. Based on the measured CO, CO₂,

HC, and O₂ components, it can calculate the excess air coefficient.

 

This instrument is assembled using advanced technologies and key components synchronized

with international standards. It is equipped with a high-performance microprocessor, a liquid

crystal display, and a compatible interface, making it an intelligent instrument. It is lightweight,

compact, and portable, with rapid preheating and measurement functions.

It is performing multi-mode dual-total speed testing on gasoline, natural gas (LNG/CNG),

liquefied petroleum gas (LPG), ethanol gasoline, and various new energy vehicles with fuel

power.

It conforms to the International Organization for Legal Metrology (OIML) international

metrology regulations OIML 99/2000(E) and ISO 3930.

The latest revised version of the instrument specification is suitable for use by environmental

protection departments, vehicle inspection stations, automobile manufacturers, mobile exhaust

emission testing stations, and other similar organizations.

Optional Bluetooth mini printer available for printing real-time measurement results and

historical data.

Built-in high-capacity lithium battery; under normal outdoor temperatures, it can operate

continuously for over 6 hours on a full charge.

It is used online with a charger (Note: Due to the characteristics of lithium batteries, the

instrument's operating time will be relatively reduced at low temperatures).

Built-in high-performance, low-power Wi-Fi module; connection distance with tablet computer

can reach over 15 meters.

 

 

 

 

DRIVING SIMULATOR CAR DISPLAY SYSTEM

ZC-QBA04

Feature:

− Driving Software Language: English.

− Drive Mode: Right-Hand Drive.

− Auto mode should be available in programming.

− Operation Mode: Auto or Manual available

1. Hardware and Specifications:

1. Cockpit Shell Material:

The instrument panel utilizes genuine vehicle components, and the steering mechanism is

constructed from a genuine vehicle steering gear assembly with real vehicle rpm. The gear shift

cover features a solid, integrated, real vehicle center channel, giving it a realistic feel.

2. Transmission:

Utilizing the same transmission principle as of any reputed international car brand. Gear positions

include: Reverse, First, Second, Third, Fourth, Fifth, and Neutral (Automatic transmission only includes

Drive, Reverse, Neutral, and Park).

3. Cockpit:

The cockpit consists of the steering gear, accelerator, clutch, foot brake, parking brake, and other

operating components, as well as the seat.

4. Sensors:

Steering wheel (High-precision angle sensor). Hydration release (Contactless magnetic sensor)!

5. Steering wheel (Latest technology torsion spring force feedback)

6. Car Seat:

Professional car seat, beautiful and durable. Adjustable fore and aft, suitable for teenagers.

7. Other Components:

Left and right turn signals, emergency lights, horn, ignition switch, main power switch, wipers, high and

low beams.

8. Software Driving Main Interface ▪ After the startup screen, the bottom of the interface displays the progress of the throttle, brake,

steering, and clutch.

▪ The new wide-angle, broadband driving simulation interface displays various

▪ indicators, text prompts, gear position, and training results.

▪ The rearview mirrors (left, right, and center) are adjustable for changing viewing angles.

▪ Functions and Technical Specifications

▪ It has both active and passive functions.

▪ Visual Image Technical Specifications

▪ The entire visual environment is generated by a computer in real-time 3D images. A multi-degree

of-freedom mathematical model enables realistic simulation of vehicle steering, braking, and

acceleration.

Training Modules:

− Basic Training: Vehicle starting, basic driving skills, road driving.

− In-situ Driving: Five major operation indicators.

− Passive Driving: Voice-guided driving practice.

− Base Driving: On-site initial training.

− Ordinary Road: Spacious roads with low intersections.

− Mid-level: Mountain, rural, urban roads, and highways (realistic slopes, crossings, traffic, and

service stations).

− High-level: Muddy, inundated, and gravel roads with realistic traction, resistance, and braking

effects.

− Automatic Scoring & Evaluation:

− System automatically scores each training session.

− Error operations logged with reasons for score deductions. Performance monitoring report

generated.

OPERATING ENVIRONMENT AND SPECIFICATIONS:

External monitor dimension (L1500 x W1400 x H1300)

Loading Port WIDTH (mm): 850

Cabin Weight (kg): 210

Maximum Resolution: 5760 x 1080

Power Consumption: 420W

Operating Voltage: AC220V ±50Hz

Operating Temperature: 10°C - 40°C

Relative Humidity: 20% - 90%

Implementation Standard: JT/T 378-2014

Motherboard: A55

CPU: AMD A4-3300

Hard Drive: ≥ 120 GB.

Memory (RAM): ≥ 4 GB.

Power Supply Unit: ≥ 450 W.

Operating System: Windows 10 (64-bit)

 

 

 

 

INJECTOR TESTER

ZC-QBA03

FEATURES:

Computer-controlled system with comprehensive functions and high precision. It can simulate any vehicle

operating condition for testing and analysis. Atomization and leak detection and analysis are intuitive and

clear, and the operating conditions of four electric nozzles can be simultaneously monitored for easy

observation. A unique ultrasonic drainage device ensures easy and safe operation.

TECHNICAL PARAMETERS

❖ Power Supply: AC220V±10% 50Hz

❖ Ultrasonic Power: 60W

❖ Ultrasonic Frequency: 28kHz

❖ Oil Tank Capacity: 3L

❖ Test Tube Capacity: 120cc

❖ System Flow Rate: 3L

❖ Speed Range: 0-9950 rpm, Step Size: 50 rpm

❖ Pulse Width: 0-20ms, Step Size: 0.1ms

❖ Counting Range: 0-9950 rpm, Step Size: 50 rpm

❖ System Oil Pressure: 0-5 kg/cm² (Adjustable)

❖ Number of Cylinders: 4 Built-in ultrasonic wave

❖ Operating environment: +10°C - 40°C

❖ Relative humidity: <85%

❖ External magnetic field strength: <400A/m

❖ Automatic oil return, external ultrasonic wave

❖ Device dimensions: 78*57*130cm

❖ Weight: 42kg

 

 

 

 

 

 

 

 

 

WHEEL BALANCING MACHINE

ZC-QBA01

FEATURES:

− Fully automatic with user-friendly measuring arms.

− Is automatically locate and brake at the unbalance position after rotation for faster fitting of

wheel weights.

− 21″ LCD Screen

− has self-calibration feature.

− 40mm threaded shaft mm/inch.

− Normal, Static, AL1, AL2, AL3, hidden, & optimal balance modes.

− is supplied with Haweka speed nut, wheel calliper, weight pliers, 4 piece cone set. Back or

front mounting.

− Safety hood is included.

− is user-friendly software, Automatic acquisition of diameter, distance and width.

− The machine has 5 aluminium balancing programs and 2 aluminium smart balancing

programs (designed to save weight and increase speed).

− has Tyre and rim position optimization function and weight split function to hide weights

behind spokes on dress wheels. The diameter of balancing shaft is sufficient enough to work

with standard accessories.

− The machine is automatically lock the wheel on imbalance position by electromagnetic

braking function.

− Six o clock weight placement mode, with laser indicating line

 

 

 

 

 

 

FULL VEHICLE ELECTRICAL EQUIPMENT TRAINING PLATFORM

ZC-QCD16C

Product Introduction

This full-vehicle electrical training platform uses actual vehicle electrical components as its

foundation, fully demonstrating the composition and operation of various automotive

electrical systems, including the engine anti-theft system, instrument system, lighting system,

wiper system, horn system, ignition system, power window system, power door lock, audio

system, starting system, and charging system.

It is suitable for schools to teach the theory and maintenance of vehicle electrical systems.

Functional Features

1. A fully functional automotive electrical system, showcasing the composition and structure

of the entire automotive electrical system.

When the power is turned on, operate the various electrical switches and buttons on the

teaching board to realistically demonstrate the working process of various automotive

electrical systems, such as the engine electronic control system, instrument system, lighting

system, wiper system, horn system, ignition system, power window system, power door lock,

audio system, starting system, and charging system.

2. The equipment panel is made of high-grade aluminum composite panel that is

impact-resistant, stain-resistant, fireproof, and moisture-proof. The surface is treated with a

special primer spraying process. The panel is printed with a color circuit diagram that will

never fade. Trainees can intuitively compare the circuit diagram with the actual object to

understand and analyze the working principles of various electrical systems in the vehicle.

3. The teaching board panel is equipped with test terminals, which can be used to directly test

the electrical signals of various electrical system circuit components of the vehicle, such as

resistance, voltage, current, frequency signals, etc.

4. The device panel is equipped with a diagnostic connector, which can be connected to a

dedicated or universal automotive decoder to perform self-diagnostic functions such as ECU

code query, fault code reading, fault code clearing, data stream reading, actuator testing,

parameter setting, waveform analysis, and key matching for the engine control unit,

instrument cluster, and comfort system unit.

5. The equipment panel is made of 1.5mm cold-rolled steel sheet, stamped and formed, with an attractive appearance. The base frame is made of welded steel structure with a

spray-painted surface and includes self-locking casters. The teaching board base is equipped

with a 40cm tabletop made of ABS plastic through a one-piece vacuum forming process,

which is anti-slip and anti-static, and convenient for placing documents, testing instruments,

etc.

6. Equipped with two self-closing drawers, one of which is used for storing frequently used

tools.

Technical Specifications

External dimensions (approx.): 2400×650×1850mm (length×width×height)

Operating voltage: DC 12V

Operating temperature: -40℃～+50℃

asynchronous motor

Voltage: AC 220V

Power: 2.2KW

Rotational speed: 1420 r/min

Steel pipe: 40*40*3mm

Server rack: 1.5mm cold-rolled steel plate, stamped and formed;

Casters: 100*60mm

Supporting Tools:

This training platform is equipped with a professional integrated tool system, which includes a

complete set of disassembly and assembly tools to help teachers and students efficiently complete

equipment disassembly and assembly operations during training sessions, providing convenient and

professional tool support for the smooth implementation of training teaching

 

 

Hot Tags: catalogues, China, manufacturers, suppliers, engineering, OEM, ODM, Air Bag System Trainer, automotivetraining equipment, CRDI Common Rail Direct Injector System, educational driving school lab training equipment, educational school training kit, hybrid power dual-fuel engine