Two Seater 60V 4000W Mini Electric Car with Optional Battery

After years of unremitting efforts, we have been committed to the research and innovation of automotive education simulator, Central Door Locking, electronic fuel injection(efi) system. Our enterprise tenet: 'exchange your trust and support with service and sincerity, mutual benefit and win-win together'. Our company has strong project development and operation management capabilities, and has accumulated rich investment experience.

Air Conditioning and Climate Control System Training Board

– The air flow fan speed

– The air flow flap positions

– The interior (inside) temperature

– The refrigerant R134a pressure changes depending on the speed of the cooling radiator fan

– The rate of the temperature change depending on the speed of the air flow radiator fan

– The air flow flap position according to operation modes: defrost, air recirculation (fresh air) or footwell

• The training board has a diagram with LED‘s which shows the operation modes of the outlets and flaps;

• The training board has a complete electric wiring diagram with built – in banana plug 

 jumpers for measurements and simulation of the system fault codes;

• Ability to simulate more than 15 system faults by disconnecting banana plug jumpers. Ability to monitor the changingoperation mode of each system component;

• The training board has an integrated voltmeter. It displays voltage of electronic system components:

• – G92 Control motor potentiometer for temperature flap

– G114 Control motor potentiometer, footwell/defroster flap

– G112 Control motor potentiometer, central flap

– G113 Control motor potentiometer, air flow flap

– G89 Fresh air intake duct temperature sensor

– G191 Vent. temperature sender, center

– G192 Vent. temperature sender, footwell

– G17 Ambient temperature sensor

• The integrated thermometer displays the temperature change depending on the pressure of the refrigerant R134a;

Diagnostic and measurement Oscilloscope/multimeter

• System‘s parameters are measured by connecting to the banana connector;

• Ability to measure electrical signal parameters of each system component (such as sensor or actuator)

Control unit diagnosis (with the scan tool)

• Diagnosis through OBD 16 – pin diagnostic connector

• Electronic control unit (ECU) identification

• Reading/erasing fault codes

• Displaying the operating system parameters (live data)

• Activating the actuators (depends on the control unit)

• Control unit encoding/configuration (depends on the control unit)

Control unit diagnosis (manual procedures without the scan tool)

• Manual diagnostics of Climatronic ECU

• Error reading – manual procedures

• Displaying the operating system parameters (live data) – manual procedure

Other

• The stand has a closed structure – internal wiring is not visible

• Power supply: 220V 

 • Dimensions approx.: (HxLxW): 1680x800x500mm

• Nett weight approx.: 100 Kg

• Made in EU

• CE certificate

Optional accessories

• Automotive oscilloscope

• OBD Diagnostic scan tool

• Air conditioning recharge station

With effective quality and efficiency control, we produce high-quality Two Seater 60V 4000W Mini Electric Car with Optional Battery and win the trust and affirmation of customers at home and abroad. However, we still strive for improvement and maintain stable high-quality products to meet the requirements of customers. 'Serving customers with heart' is our service tenet, and we use perfect pre-sales, in-sales and after-sales service to satisfy customers. We fully carry forward the corporate spirit of friendship, mutual assistance, and dedication, and earnestly fulfill corporate social responsibilities.