18000BTU Acdc Grid Type Solar Air Conditioner Consuming 950W Only

We hope that the use of our automotive manual transmission, air conditioning auto, CVT Gearbox Cutaway Model will be more assured, so that customers can be more satisfied with our products and services. Our company has high-quality R&D personnel and production technicians, as well as a number of key technologies in the industry. Our huge production scale, meticulous and perfect production management and procurement system and rigorous quality control process provide strong guarantee for the rapid and high-quality completion of customer orders.

Air Conditioning and Climate Control System Training Board

– The air flow fan speed

– The air flow flap positions

– The interior (inside) temperature

– The refrigerant R134a pressure changes depending on the speed of the cooling radiator fan

– The rate of the temperature change depending on the speed of the air flow radiator fan

– The air flow flap position according to operation modes: defrost, air recirculation (fresh air) or footwell

• The training board has a diagram with LED‘s which shows the operation modes of the outlets and flaps;

• The training board has a complete electric wiring diagram with built – in banana plug 

 jumpers for measurements and simulation of the system fault codes;

• Ability to simulate more than 15 system faults by disconnecting banana plug jumpers. Ability to monitor the changingoperation mode of each system component;

• The training board has an integrated voltmeter. It displays voltage of electronic system components:

• – G92 Control motor potentiometer for temperature flap

– G114 Control motor potentiometer, footwell/defroster flap

– G112 Control motor potentiometer, central flap

– G113 Control motor potentiometer, air flow flap

– G89 Fresh air intake duct temperature sensor

– G191 Vent. temperature sender, center

– G192 Vent. temperature sender, footwell

– G17 Ambient temperature sensor

• The integrated thermometer displays the temperature change depending on the pressure of the refrigerant R134a;

Diagnostic and measurement Oscilloscope/multimeter

• System‘s parameters are measured by connecting to the banana connector;

• Ability to measure electrical signal parameters of each system component (such as sensor or actuator)

Control unit diagnosis (with the scan tool)

• Diagnosis through OBD 16 – pin diagnostic connector

• Electronic control unit (ECU) identification

• Reading/erasing fault codes

• Displaying the operating system parameters (live data)

• Activating the actuators (depends on the control unit)

• Control unit encoding/configuration (depends on the control unit)

Control unit diagnosis (manual procedures without the scan tool)

• Manual diagnostics of Climatronic ECU

• Error reading – manual procedures

• Displaying the operating system parameters (live data) – manual procedure

Other

• The stand has a closed structure – internal wiring is not visible

• Power supply: 220V 

 • Dimensions approx.: (HxLxW): 1680x800x500mm

• Nett weight approx.: 100 Kg

• Made in EU

• CE certificate

Optional accessories

• Automotive oscilloscope

• OBD Diagnostic scan tool

• Air conditioning recharge station

We are willing to set an example to provide consumers with more valuable 18000BTU Acdc Grid Type Solar Air Conditioner Consuming 950W Only and services and strive to promote the development of the industry. We are committed to providing more mature products to the market and building ourselves into a well-known brand at home and abroad. In order to solve the problems of sustainable development and innovation, we have gradually formed our characteristic management system in many years of management practice.