12V DC Powered Car Air Conditioning System Truck Van Parking Air Conditioner

We have been committed to product technology and manufacturing innovation and research and development, and strive to provide customers with more optimized and economical gasoline engine training bench, Sectioned Automobile Chassis, car engine simulation. Our company's product market is vast and we have established a long-term cooperative relationship with a number of distributors and manufacturers and has been unanimously praised by the industry. Our company has a complete and scientific quality management system. Well-run equipment, expert income workforce, and far better after-sales expert services.

Air Conditioning and Climate Control System Training Board

– The air flow fan speed

– The air flow flap positions

– The interior (inside) temperature

– The refrigerant R134a pressure changes depending on the speed of the cooling radiator fan

– The rate of the temperature change depending on the speed of the air flow radiator fan

– The air flow flap position according to operation modes: defrost, air recirculation (fresh air) or footwell

• The training board has a diagram with LED‘s which shows the operation modes of the outlets and flaps;

• The training board has a complete electric wiring diagram with built – in banana plug 

 jumpers for measurements and simulation of the system fault codes;

• Ability to simulate more than 15 system faults by disconnecting banana plug jumpers. Ability to monitor the changingoperation mode of each system component;

• The training board has an integrated voltmeter. It displays voltage of electronic system components:

• – G92 Control motor potentiometer for temperature flap

– G114 Control motor potentiometer, footwell/defroster flap

– G112 Control motor potentiometer, central flap

– G113 Control motor potentiometer, air flow flap

– G89 Fresh air intake duct temperature sensor

– G191 Vent. temperature sender, center

– G192 Vent. temperature sender, footwell

– G17 Ambient temperature sensor

• The integrated thermometer displays the temperature change depending on the pressure of the refrigerant R134a;

Diagnostic and measurement Oscilloscope/multimeter

• System‘s parameters are measured by connecting to the banana connector;

• Ability to measure electrical signal parameters of each system component (such as sensor or actuator)

Control unit diagnosis (with the scan tool)

• Diagnosis through OBD 16 – pin diagnostic connector

• Electronic control unit (ECU) identification

• Reading/erasing fault codes

• Displaying the operating system parameters (live data)

• Activating the actuators (depends on the control unit)

• Control unit encoding/configuration (depends on the control unit)

Control unit diagnosis (manual procedures without the scan tool)

• Manual diagnostics of Climatronic ECU

• Error reading – manual procedures

• Displaying the operating system parameters (live data) – manual procedure

Other

• The stand has a closed structure – internal wiring is not visible

• Power supply: 220V 

 • Dimensions approx.: (HxLxW): 1680x800x500mm

• Nett weight approx.: 100 Kg

• Made in EU

• CE certificate

Optional accessories

• Automotive oscilloscope

• OBD Diagnostic scan tool

• Air conditioning recharge station

We have established long-term and stable cooperative relations with many retailers and agents, and we can customize the size and specifications of 12V DC Powered Car Air Conditioning System Truck Van Parking Air Conditioner according to customer requirements. The three elements of corporate slogan, corporate philosophy and customer experience explain the meaning behind our company's existence, and at the same time clarify the basic principles that are the foundation of the company. We are willing to establish long business relationship with those who seek the high quality products and good service.