Guangdong Zhongcai Educational Instrument focuses on the production of various types of automobile training benches, engine training benches, and transmission training benches. The Beiqi Foton 2.8TC electronically controlled high-pressure common rail diesel engine training bench is produced. The equipment adopts the new Beiqi Foton 2.8TC electric Based on the controlled high pressure common rail diesel engine (BOSCH common rail system), the engine can be started, accelerated, decelerated and other working conditions of practical operation, and the composition structure and working process of the electronically controlled high pressure common rail diesel engine can be truly demonstrated. It is suitable for the teaching needs of middle and higher vocational and technical colleges, general education colleges and training institutions for electronically controlled high-pressure common rail diesel engines and maintenance training.
Features:
1. A real and operational electronically controlled high pressure common rail diesel engine, fully demonstrating the composition and working process of the electronically controlled high pressure common rail diesel engine.
2. The color inkjet circuit diagram is drawn on the panel of the training platform. The inkjet diagram is protected by 3mm thick plexiglass. Students can intuitively compare the circuit diagram and the real object of the electronically controlled high-pressure common rail diesel engine to understand and analyze the working principle of the control system.
3. There are detection terminals installed on the panel of the training platform, which can directly detect the electrical signals of the pins of each sensor, actuator, and engine control unit on the panel, such as resistance, voltage, current, frequency signals, etc.
4. There are car meters installed on the training platform panel, which can display the changes of parameters such as engine speed, water temperature, oil pressure light, charging indicator light, and electronic control system fault indicator light in real time.
5. The training bench is equipped with a diagnostic seat, which can be connected to a dedicated or general-purpose car decoder to perform self-diagnosis functions such as reading fault codes, clearing fault codes, and reading data streams for the engine electronic control system.
6. The training bench is equipped with a throttle control device, which can facilitate the acceleration and deceleration of the engine.
7. The training platform is equipped with installation protection devices such as the main power switch, water tank shield, flywheel shield, etc.
8. The base of the training platform is welded by steel structure, and the surface is treated by spraying process.
9. Equipped with intelligent fault setting and assessment system.
technical parameter:
1. Dimensions: 1400×1000×1800mm (length×width×height)
2. Working power supply: DC 12V
3. Fuel label: according to the engine model
4. Fuel tank volume: 10L
5. Working temperature: -40℃～+50℃
