Working Model Of Power Steering With Suspension And Tires Training Platform

Guangdong Zhongcai Education Equipment Co.,Ltd. is one of the most reliable manufacturers and suppliers of working model of power steering with suspension and tires training platform in China. Welcome to buy high quality engineering education equipment from our factory. Also, OEM&ODM service is available.

Working model of Power Steering with Suspension and Tires Training Platform

Technical Specifications
**Electrical Parameters:** System operating voltage: DC 12V; EPS motor power: ≥200W; External power input: AC 220V ±10% 50Hz (some models support AC 380V three-phase); Total power consumption: typically ≤500W.
**Mechanical Dimensions:** Common stand dimensions range from 1500×1000×1300mm to 1700×1200×1800mm (L×W×H); includes swivel casters with locks for mobility.
**Environmental Adaptability:** Operating temperature range: -20°C to +50°C (some wide-temperature models reach -40°C to +50°C).
**Functional Configuration:** Equipped with an OEM EPS assembly (including torque/steering angle sensors, ECU, and assist motor), OBD-II diagnostic port, 4mm/8mm test terminals, a color schematic panel, and a fault simulation module (capable of setting 6 to over 150 fault points).
Key Differences
Parameters may vary slightly depending on the manufacturer and the specific vehicle model supported (e.g., BYD E5, VW Sagitar, BAIC EV series):

**Dimensional Differences:** Basic educational models are smaller (approx. 1500×1000×1300mm), while models incorporating full suspension simulation are larger (up to 1700×1200×1800mm).
**Power Requirements:** Most operate on single-phase AC 220V, though some large, comprehensive training stands may require three-phase AC 380V.
**Fault Simulation:** Simple versions support mechanical circuit breaking (6–10 points), while smart versions allow for remote configuration of complex faults (100+ points) via mobile phone.
**Sensor Testing:** All support voltage, resistance, and waveform measurements, though terminal specifications vary (2mm, 4mm, or 8mm).
For actual procurement or use, please verify the manufacturer's detailed specifications against the specific vehicle model and training requirements. Would you like me to analyze cost-effective configurations for the various functional modules based on different budgets? I can help you quickly identify the training station solution that best meets your needs.

Hot Tags: working model of power steering with suspension and tires training platform, China, manufacturers, suppliers, engineering, OEM, ODM, electric power steering (eps) system training bench, Hydraulic Power Steering Trainer, auto steering model, power steering test bench, Driving School Equipment Electric Power Steering Training System, combination system