The electronically controlled engine belt disassembly training bench adopts the Honda 5A engine (old parts refurbished), the engine accessories are complete, can be locked at the working angle, and the universal caster bench is convenient for teaching.
(1). System overview:
The original Toyota 5A engine and related parts for electronically controlled operation are designed as relatively independent disassembly and assembly platforms and consoles, respectively. It can be turned 360 degrees and can stay stably at any angle, making it easy to disassemble and assemble. The large-area oil receiving basin can prevent tools, parts and oil from falling to the ground, and cultivate good working habits. The console is composed of electronic control system, cooling system, oil supply system, air intake and exhaust system, etc. The engine runs the test, which fully meets the requirements of the whole process of engine disassembly, reassembly, debugging, operation and inspection, and is fully suitable for engine understanding and practical learning.
(2). Product performance and characteristics:
1. During disassembly and assembly, the engine can be turned over and stationary at any axial angle.
2. The two systems of separate disassembly, assembly and operation are independent of each other, and they are convenient to connect.
3. Control the light running test, reproduce the working condition of the engine, and check the equipment effect in a timely manner.
4. Basic operation and learning of EFI engine
(3). Main parameters:
1. Dimensions: (turning frame) 1100×700×1100mm (running frame) 1000×600×1100mm
2. Movable table
